HVAC LICENSE: #19HC00532500 - PLUMBING LICENSE: #10110
CORONAVIRUS ALERT: In response to the coronavirus pandemic, wWe've implemented extra procedures to keep things clean and to keep both our employees and customers in good health. Please CLICK HERE for details.
CORONAVIRUS ALERT: In response to the coronavirus pandemic, we've implemented extra procedures to keep things clean and to keep both our employees and customers in good health. Please CLICK HERE for details.

Install a kitchen Sink

[vc_row css=”.vc_custom_1521795709269{margin-bottom: 30px !important;padding-bottom: 0px !important;}”][vc_column][vc_column_text css=”.vc_custom_1566477804672{margin-bottom: 30px !important;padding-bottom: 0px !important;}”]Firstly before beginning, read the manufacturer’s instructions and follow all building codes. If you’re not comfortable installing a kitchen sink or related components, Atlantic HVAC & Plumbing can do it for you. Select the type of replacement sink. Single bowl- and double-bowl drop-in sinks can be installed into most flat surfaces. Undermount sinks install underneath the counter and should only be used on solid-surface and natural stone countertops. There are some instructions to install a drop-in sink. Measure the size of your sink. If your sink has different dimensions and different drain locations than the unit it will place, you than need to modify the countertops opening. Remove the Old sink if exist and install the new one.[/vc_column_text][vc_mad_blockquotes image=”688″ description=”ADAM SMITH, NEW YORK”]“If you’re replacing the faucet in your existing sink, look underneath the sink to see how many holes it has – usually between 1 and 4. This determines the type of faucet that will work with your sink. A one-hole faucet can be installed in a 3- or 4-hole sink by adding a deck plate, but not vice versa.

”[/vc_mad_blockquotes][/vc_column][/vc_row][vc_row css=”.vc_custom_1519898941909{margin-bottom: 30px !important;padding-bottom: 0px !important;}”][vc_column][vc_column_text css=”.vc_custom_1566493442724{margin-bottom: 20px !important;padding-bottom: 0px !important;}”]Step 1: Turn off the water valves under the sink. Turn on the faucet to relieve pressure in the lines. Turn off power to the disposal, if applicable.

Step2: Snap a picture of the plumbing configuration before disconnecting to use as a reference later.

Step 3: Use a small bucket under the connections to catch water as you disconnect supply lines.

Step 4: Have someone hold the faucet in place from above the cabinet, while you use a basin wrench to loosen and remove the nuts holding the faucet.

Step 5: Remove the faucet and clean grime and / or sealant from the sink’s surface.[/vc_column_text][/vc_column][/vc_row]